新闻资讯
网站首页 > 新闻资讯 >

浙大中控ECS-700系统特点介绍

2021-07-30 11:52:00 来源:http://www.sdjkyqyb.com/ 53

VisualField(简称VF)系统软件是用于ECS-700系统进行控制系统组态和监控的软件包。该系统软件在系统结构上支持控制分域和操作分域,支持多人组态,支持单域导入导出、单控制站导入导出、单控制站组态备份、支持在线调试和在线下载,支持多个数据库。
Visual field (VF) system software is a software package used for ecs-700 system control system configuration and monitoring. The system software supports control domain and operation domain, multi person configuration, single domain import and export, single control station import and export, single control station configuration backup, online debugging and online download, and multiple databases.
系统组态是指在工程师站上为控制系统设定各项软硬件参数的过程。由于DCS的通用性和复杂性,系统的许多功能及匹配参数需要根据具体场合而设定。例如:系统由多少个控制域和操作域构成,每个控制域或操作域各包含多少控制站或操作节点;系统采集什么样的信号、采用何种控制方案、怎样控制、操作时需显示什么数据、如何操作等等。
浙大中控操作员软件狗
System configuration refers to the process of setting various software and hardware parameters for the control system at the engineer station. Due to the universality and complexity of DCS, many functions and matching parameters of the system need to be set according to specific occasions. For example, how many control domains and operation domains the system consists of, and how many control stations or operation nodes each control domain or operation domain contains; What kind of signal the system collects, what control scheme it adopts, how to control, what data to display during operation, how to operate, etc.
另外,为适应各种特定的需要,集散控制系统备有丰富的I/O模块、各种控制模块及多种操作平台。在组态时一般根据系统的要求选择硬件设备,当与其它系统进行数据通讯时,需要提供系统所采用的协议和使用的端口。
In addition, in order to meet various specific needs, the distributed control system is equipped with rich I / O modules, various control modules and a variety of operation platforms. During configuration, hardware equipment is generally selected according to the requirements of the system. When communicating with other systems, it is necessary to provide the protocol and port used by the system.
DCS的组态过程是一个循序渐进、多个软件综合应用的过程,在应用VisualField系统软件对控制系统进行组态时,可针对系统的工艺要求,逐步完成对系统的组态。
The configuration process of DCS is a process of step-by-step and comprehensive application of multiple software. When configuring the control system with visualfield system software, the system configuration can be completed step by step according to the process requirements of the system.
产品推荐
新闻推荐