新闻资讯
网站首页 > 新闻资讯 >

浙大中控电源中控室的一般操作原则?

2020-10-23 15:03:14 来源:http://www.sdjkyqyb.com/ 53

中控室操作的一般原则:
General operation principles of central control room:
新型干法窑系统操作的一般原则,就是根据工厂外部条件变化,适时调整各工艺系统参数,大限度地保持系统“均衡稳定”的运转,不断提高设备运转率。
The general operation principle of the new dry process kiln system is to timely adjust the parameters of each process system according to the changes of the external conditions of the plant, so as to keep the "balanced and stable" operation of the system to a large extent, and continuously improve the operation rate of the equipment.
“均衡稳定”是事物发展过程中的一个相对静止状态,它是有条件和暂时的。在实际生产过程中,由于各种主、客观因素的变化干扰,难免打破原存的平衡稳定状态,这都需要操作人员予以适当调整,恢复或达到新条件下的新的均衡稳定状态,因此运用各种调节手段来保持或恢复生产的均衡稳定,是控制室操作员的主要任务。
"Equilibrium and stability" is a relatively static state in the development process of things, which is conditional and temporary. In the actual production process, due to the changes and interference of various subjective and objective factors, it is inevitable to break the original equilibrium and stable state, which requires the operator to make appropriate adjustment to restore or reach the new equilibrium and stable state under new conditions. Therefore, it is the main task of the control room operator to use various adjustment means to maintain or restore the production equilibrium and stability.
                浙大中控电源
就全厂生产而言,应以保证烧成系统均衡稳定生产为中心,调整其它子项系统的操作。就烧成系统本身,应是以保持优化的合理煅烧制度为主,力求较充分地发挥窑的煅烧能力,根据原燃料条件及设备状况适时调整各项参数,在保证熟料质量的前提下,大限度地提高窑的运转率。
As far as the production of the whole plant is concerned, the operation of other sub item systems should be adjusted to ensure the balanced and stable production of the sintering system. In terms of the sintering system itself, it is necessary to maintain an optimized and reasonable calcination system, strive to give full play to the calcination capacity of the kiln, adjust various parameters timely according to the conditions of raw materials, fuels and equipment, and greatly improve the operation rate of the kiln on the premise of ensuring the quality of clinker.
在烧成中控室的具体操作中坚持“抓两头,保重点,求稳定,创全优”这12字诀。所谓“抓两头”,就是要重点抓好窑尾预热器系统和窑头熟料烧成两大环节,前后兼顾、协调运转;所谓“保重点”,就是要重点保证系统喂煤、喂料设备的安全正常运行,为熟料烧成的“动平衡”创造条件;所谓“求稳定”,就是在参数调节过程中,适时适量,小调渐调,以及时的调整克服大的波动,维持热工制度的基本稳定。所谓“创全优”,就是要通过一段时间的操作,认真总结,结合现场热工标定等测试工作,总结出适合本厂实际的系统操作参数,即优化参数,使窑的操作较大化,取得突出、高产、低耗、长期安全稳定文明生产的优良成绩。
In the specific operation of the central control room, the 12 word formula of "grasping both ends, ensuring key points, seeking stability, and creating all-round excellence" was adhered to. The so-called "two ends" is to focus on the two major links of kiln tail preheater system and kiln head clinker burning, taking into account before and after, and coordinated operation; the so-called "key point" is to ensure the safe and normal operation of coal feeding and feeding equipment of the system, and create conditions for the "dynamic balance" of clinker combustion; the so-called "stability" means that in the process of parameter adjustment, the proper amount of coal can be timely and appropriately, Small and gradual adjustment, timely adjustment to overcome large fluctuations, to maintain the basic stability of the thermal system. The so-called "all-round optimization" is to sum up the system operation parameters suitable for the actual plant through a period of operation, careful summary, combined with field thermal calibration and other testing work, namely, optimization parameters, so as to make the kiln operation larger and achieve outstanding, high-yield, low consumption, long-term safe, stable and civilized production.
以上是关于浙大中控电源中控室的一般操作原则,相信大家都有所了解了,如想了解更多内容欢迎点击我们的http://www.sdjkyqyb.com网站。
The above is about the general operating principles of central control room of Zhejiang University. I believe you all know something about it. If you want to know more, please click our http://www.sdjkyqyb.com Website.
产品推荐
新闻推荐