新闻资讯
网站首页 > 新闻资讯 >

中控如何进行组态修改?

2020-10-16 11:43:47 来源:http://www.sdjkyqyb.com/ 53

  如何进行组态修改?应遵循哪些步骤?
  How to modify the configuration? What steps should be followed?
  经允许,专业维护工程师在工程师站可以进行组态修改工作。进行组态修改前,必须确认组态文件是新的并且已经备份完毕。进行组态修改时,请按照组态软件使用说明书进行相关操作。组态修改完成后,请对组态修改的内容进行记录并及时将组态文件备份完成。
  With permission, the professional maintenance engineer can modify the configuration in the engineer station. Before modifying the configuration, you must confirm that the configuration file is new and has been backed up. When modifying the configuration, please follow the operation manual of configuration software. After the configuration modification is completed, please record the content of configuration modification and backup the configuration file in time.
            浙大中控操作员软件狗
  组态修改后,需要传送至操作站吗?传送组态时,应注意哪些问题?
  After configuration modification, do you need to transfer it to the operation station? What should be paid attention to when transferring configuration?
  对组态进行的任何修改,都应将组态 “传送”到各操作站,以保证操作站的运行组态与主控卡保持一致。组态传送时,应首先注意各个操作站的监控软件正在运行当中,为了不至对操作站的监控运行造成影响,因此应事先提醒被“传送”组态的操作站运行人员注意。其次被传送组态的操作站在组态传送期间,应提醒操作员暂时停止画面操作,否则可能会发生传送失败的情况。另外组态传送时,需要注意,务必使得工程师站以及各操作站的“FTP SERVER”软件处于运行状态。
  In order to ensure that the configuration of each station is consistent with that of the master station. During configuration transmission, it is necessary to pay attention to the operation of the monitoring software of each operation station. In order to avoid affecting the monitoring operation of the operation station, the operator of the operation station that is configured by "transmission" should be reminded in advance. Secondly, during the configuration transmission, the operator should remind the operator to stop the screen operation temporarily, otherwise the transmission failure may occur. In addition, when configuring the transmission, it is necessary to make sure that the "FTP server" software of the engineer station and each operation station is in the running state.
产品推荐
新闻推荐