新闻资讯
网站首页 > 新闻资讯 >

中控室日常管理应注意些什么?

2020-09-28 11:41:01 来源:http://www.sdjkyqyb.com/ 53

  中控室日常管理应注意些什么?
  What should be paid attention to in the daily management of central control room?
  A:控制室的日常管理对系统稳定运行和维护很重要,日常管理应注意:
  A: The daily management of the control room is very important for the stable operation and maintenance of the system
  1)、控制室门窗位置布置合理,操作站、控制柜、UPS放置规范,标识清楚。
  1) The location of doors and windows in the control room is reasonable, the operation station, control cabinet and ups are placed in a standard manner with clear marks.
  2)、控制室保持日常清洁,维持适当的温度和湿度,检查照明、空调运行情况。
  2) The control room shall be kept daily clean, proper temperature and humidity shall be maintained, and the operation of lighting and air conditioning shall be checked.
  3)、检查系统防水、防尘、防腐蚀和防振情况,日常发现有漏洞的地方及时整改。
  3) Check the waterproof, dust-proof, corrosion-proof and vibration proof conditions of the system, and rectify the loopholes in time.
  4)、规范管理,不允许无关人员触碰控制柜卡件,对操作站设置密码,加强保密安全管理。
  4) Standardize the management, do not allow irrelevant personnel to touch the control cabinet card, set password for the operation station, and strengthen the security management.
  5)、对控制柜内开关、端子、外配等部件标识检查,使之标识清晰方便维护。
  5) Check the marks of switches, terminals and external parts in the control cabinet to make them clear and convenient for maintenance.
  建议:控制室温度范围0-50摄氏度,20度左右适宜;湿度范围:10%-90%RH,无凝露。
  Suggestion: the temperature range of control room is 0-50 ℃, about 20 ℃; humidity range: 10% - 90% RH, no condensation.
             浙大中控dcs卡件XP313
  DCS系统在日常维护时如何能了解到系统当前故障情况?
  How can DCS know the current fault situation of the system in daily maintenance?
  A:日常维护时注意观察很重要,重点观察了解的地方为:
  A: It is very important to pay attention to observation during daily maintenance. The key points of observation and understanding are as follows:
  1、控制站卡件指示等显示是否异常(fail灯是否亮红灯),
  1. Whether the card indication of control station is abnormal (whether the fail light is on red light),
  2、进入监控“故障诊断”画面查看是否有卡件运行故障提示、通讯网络异常提示,
  2. Enter the monitoring "fault diagnosis" screen to check whether there is any fault prompt of card operation and abnormal prompt of communication network,
  3、检查系统供电是否正常。
  3. Check whether the power supply of the system is normal.
  4、检查控制站电源风扇是否运行,交换机指示灯是否正常,是否有腐蚀现象(接线头或机柜铜条处是否发黑等现象)。
  4. Check whether the power supply fan of the control station is running, whether the switch indicator is normal, and whether there is corrosion (whether the connector or cabinet copper strip is blackened, etc.).
  以上是关于中控室日常管理应注意事项和DCS系统日常维护的内容介绍,希望对大家有所帮助,如想了解更多内容欢迎点击我们的网站。本司是浙大中控dcs卡件XP313浙大中控dcs卡件XP314的供应商,型号齐全,欢迎您来选购。
  The above is about the central control room daily management should pay attention to the content of daily maintenance and DCS system introduction, hope to help you, if you want to know more content, welcome to click our website. Our company is the supplier of Zhejiang University central control DCS card xp313 and Zhejiang University central control DCS card xp314. You are welcome to purchase.
产品推荐
新闻推荐