新闻资讯
网站首页 > 新闻资讯 >

初次使用软件狗应如何操作?

2020-09-25 16:09:55 来源:http://www.sdjkyqyb.com/ 53

  1)、首先请不要插入浙大中控操作员软件狗,如果已经插入,请先拔出;
  1) First of all, please do not insert the central control operator software dog of Zhejiang University. If it has been inserted, please pull it out first;
  2)、在安装新版本的驱动软件以后,运行驱动主程序,会弹出“注册方式选择对话框”,请选择“软件狗注册方式”,然后点击“确定”按钮;
  2) After the new version of driver software is installed, run the driver main program, and the "registration mode selection dialog box" will pop up. Please select "software dog registration method", and then click the "OK" button;
  3)、如果系统没有安装过软件狗的驱动,则会弹出“即将安装软件狗驱动”的提示信息,这时请确认软件狗没有插入,然后按“确定”,系统就会自动安装软件狗的驱动程序;如果系统以前安装过软件狗的驱动,则不会提示而直接进入第5步;
  3) If the software dog driver has not been installed in the system, a prompt message "will be installed software dog driver" will pop up. At this time, please confirm that the software dog is not inserted, and then press "OK", the system will automatically install the software dog driver. If the system has previously installed the software dog driver, it will not prompt and go to step 5 directly;
  4)、如果系统自动安装成功,则会提示安装成功,这时,请插入软件狗以后再按“确定”按钮;如果提示错误信息,则请与我们联系解决。
  4) If the automatic installation of the system is successful, it will prompt that the installation is successful. At this time, please insert the software dog and then press the "OK" button. If an error message is prompted, please contact us for solution.
               浙大中控操作员软件狗
  5)、系统将会自动检测软件狗是否已经插入,如果没有检测到,则会提示请插入软件狗,这时如果已经插入软件狗,请拨出以后重新插入,否则,请直接插入,然后点击“确定”即可。
  5) The system will automatically detect whether the softdog has been inserted. If not, you will be prompted to insert the dongle. At this time, if the dongle has been inserted, please dial it out and insert it again. Otherwise, please insert it directly, and then click "OK".
  注意:
  be careful:
  1)、由于有时系统检测错误,即使已经插入软件狗也可能提示没有插入,这时请拨出以后重新插入再试。
  1) Due to the system detection error sometimes, even if the software dog has been inserted, it may prompt that it has not been inserted. In this case, please dial it out and insert it again.
  2)、如果以上步骤不能顺利进行,请到网站下载软件狗驱动程序进行安装,然后再按上述的步骤操作。
  2) If the above steps can not be carried out smoothly, please download the software dog driver on the website for installation, and then follow the above steps.
  以上是关于初次使用软件狗应如何操作的介绍,希望对大家有所帮助,如想了解更多内容欢迎咨询浙大中控操作员软件狗网站。
  The above is about how to operate the softdog for the first time. I hope it will help you. If you want to know more, please consult the website of Zhejiang University central control operator softdog.
产品推荐
新闻推荐