新闻资讯
网站首页 > 新闻资讯 >

操作员站硬件管理

2022-04-19 20:32:07 来源:http://www.sdjkyqyb.com/ 53

操作员站硬件管理
Hardware management of operator station
1. 保持清洁,防灰防水;2. 严禁擅自改装、拆装机器;3. 键盘与鼠标操作须用力恰当,轻拿轻放,避免尖锐物刮伤表面;4. 尽量避免电磁场对显示器的干扰,避免移动运行中的工控机、显示器等,避免拉动或碰伤设备连接电缆和通讯电缆等。5. 显示器应远离热源,保证显示器通风口不被他物挡住;6. 在进行显示器连接或拆除前,请确认计算机电源开关处于“关”状态;7. 定期用湿海绵清洗显示器;8. 严禁在已上电情况下进行连接、拆除或移动操作员站主机;9. 操作员站主机电源接地线应与系统的工作地相连,减少干扰;10. 操作员站主机的滤网要经常清洗。
1. Keep clean, ash proof and waterproof; 2. It is strictly prohibited to refit or disassemble the machine without authorization; 3. The keyboard and mouse must be operated with proper force and handled gently to avoid sharp objects scratching the surface; 4. Try to avoid the interference of electromagnetic field on the display, avoid the industrial computer and display in mobile operation, and avoid pulling or bumping the equipment connecting cable and communication cable. 5. The display shall be kept away from the heat source to ensure that the vent of the display is not blocked by other objects; 6. Before connecting or removing the monitor, please confirm that the computer power switch is in the "off" state; 7. Regularly clean the display with wet sponge; 8. It is strictly prohibited to connect, remove or move the host of the operator station when it is powered on; 9. The host power grounding wire of the operator station shall be connected with the working ground of the system to reduce interference; 10. The filter screen of the host machine in the operator station shall be cleaned frequently.
操作员站软件管理
Operator station software management
1. 严禁使用非正版Windows 软件;2. 操作人员严禁退出实时监控;3. 操作人员严禁任意修改计算机系统的配置设置,严禁任意增加、删除或移动硬盘上的文件和目录;4. 系统维护人员应谨慎使用外来软盘或光盘等,防止侵入;5. 严禁在实时监控操作平台进行不必要的多任务操作;6. 系统维护人员应做好控制子目录文件的备份,各自控回路的 PID 参数,调节器正反作用等系统数据记录工作;7. 系统维护人员对系统参数作出必要修改后,应及时做好记录工作。
1. It is strictly prohibited to use non genuine windows software; 2. Operators are strictly prohibited from exiting real-time monitoring; 3. It is strictly prohibited for the operator to arbitrarily modify the configuration settings of the computer system, and to arbitrarily add, delete or move the files and directories on the hard disk; 4. System maintenance personnel shall carefully use external floppy disks or optical discs to prevent intrusion; 5. Unnecessary multi task operation on the real-time monitoring operation platform is strictly prohibited; 6. The system maintenance personnel shall backup the control subdirectory files, and record the PID parameters of their respective control circuits, the positive and negative effects of regulators and other system data; 7. After the system maintenance personnel make necessary modifications to the system parameters, they shall make records in time.
操作员站检查
Operator station inspection
1. 主机、显示器、鼠标、键盘等硬件是否完好;2. 实时监控工作是否正常,包括数据刷新、各功能画面的(鼠标和键盘)操作是否正常;3. 查看故障诊断画面,是否有故障提示。
1. Whether the host, display, mouse, keyboard and other hardware are intact; 2. Whether the real-time monitoring work is normal, including data refresh and whether the operation of each function screen (mouse and keyboard) is normal; 3. Check the fault diagnosis screen to see if there is a fault prompt.
1. 严禁擅自改装、拆装系统部件;2. 不得拉动机笼接线;3. 不得拉动接地线;4. 避免拉动或碰伤供电线路;5. 锁好柜门。6. 定期清扫控制站风扇滤网。
1. It is strictly prohibited to refit or disassemble system components without authorization; 2. Do not pull the cage wiring; 3. Do not pull the grounding wire; 4. Avoid pulling or bumping the power supply line; 5. Lock the cabinet door. 6. Clean the fan filter screen of the control station regularly.
控制站检查
Control station inspection
1. 卡件是否工作正常,有无故障显示(查看指示灯);2. 直流电源模块是否工作正常。3. 接地线连接是否牢固。
1. Check whether the card works normally and whether there is fault display (check the indicator light); 2. Whether the DC power module works normally. 3. Whether the grounding wire is firmly connected.
通信网络管理
Communication network management
1. 不得拉动或碰伤通信电缆;2. 系统上电后,通信线接头不能与机柜等导电体相碰,互为冗余的通信线、通信接头不能碰在一起,以免烧坏通信网卡
1. Do not pull or damage the communication cable; 2. After the system is powered on, the communication line connector shall not collide with the cabinet and other conductors, and the mutually redundant communication lines and communication connectors shall not collide with each other to avoid burning the communication network card
以上就是为大家介绍的有关浙大中控操作员软件狗的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以专业的态度,为您提供服务http://www.sdjkyqyb.com
The above is a detailed introduction to the central control operator dongle of Zhejiang University. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service http://www.sdjkyqyb.com
产品推荐
新闻推荐